Comments on Sweetxml: Running my own SMS Service with Kannel and HUAWEI ...

Hi tman Glad to here that you've made progres...

2012-02-02T19:01:32.342+01:00

Hi tman

Glad to here that you've made progress. I really can't help you out, since I haven't used kannel since I wrote this blogpost. If you still think I can :-) post you're logs, since having a new pair of eyes might actually do a difference.

Brgds Brian

Hello, Found the issue with my last post. The mod...

2012-02-01T17:52:16.186+01:00

Hello,

Found the issue with my last post. The modem definition in the kannel configuration file "smskannel.conf" must have a modem id, name equal to what the AT2 driver "detect modem type" returns.

Now issue is getting the E173 CNIM values and actaully getting the program to receive an sms

Hello, thanks for a great tutorial. However, for ...

2012-01-30T10:48:57.806+01:00

Hello,

thanks for a great tutorial. However, for me everything seems to go well until my config file is read for modems. I do not know why it reads modems. the gateway then goes into PANIC. May you please assist

# My own 'virtual' SMSC with the HUAWEI E169
group = smsc
smsc = at
modemtype = auto
device = "/dev/ttyUSB_utps_modem"
my-number = "26773334913"
log-level = 0
pin = "0000"

2012-01-30 11:42:34 [4846] [8] DEBUG: AT2[/dev/ttyUSB_utps_modem]: Reading modem definitions from
2012-01-30 11:42:34 [4846] [8] DEBUG: AT2[/dev/ttyUSB_utps_modem]: Found <1> modems in config
2012-01-30 11:42:34 [4846] [8] PANIC: AT2[/dev/ttyUSB_utps_modem]: Cannot detect modem and generic not found
2012-01-30 11:42:34 [4846] [8] PANIC: /usr/local/kannel/sbin/bearerbox(gw_panic+0xbc) [0x80d03bc]

Hi Anon Honestly I don't know, think you'...

2012-01-12T10:19:35.433+01:00

Hi Anon

Honestly I don't know, think you'll need to find either a supplier or another forum to help you with that question.

Brgds Brian

Hi Can't we use Wavecom Q2303A GSM Modem wit...

2012-01-11T10:40:38.682+01:00

Hi

Can't we use Wavecom Q2303A GSM Modem with Module USB AT Commands as a SMS Gateway for send/recive sms Using Kannel?

hmm. I'm pretty blank on this. Does it respond...

2010-11-26T19:53:00.278+01:00

hmm. I'm pretty blank on this.
Does it respond if you fix it to:

text = "No action specified"

instead of using get-url?

Does you get-url work - that is if you call with the expected string?

I am using an SMSC Simulator from opensmpp.logica....

2010-11-26T18:23:12.473+01:00

I am using an SMSC Simulator from opensmpp.logica.com. It is my only smsc configured.
Below is my only sms-service entry:

group = sms-service
keyword = default
get-url = http://localhost:8080/KannelCallBak/?sms=%a

I see Kannel logs showing that the sms was received and forwarded to my smsbox, but the get-url is not called. :(

Hi Telmo Pimentel Mota I don't have sample r...

2010-11-25T21:24:54.536+01:00

Hi Telmo Pimentel Mota

I don't have sample ready and it's been quite some time since I last looked into this - but what is your problem? and how does it show in your log? You could start with a really simple hardcoded service. Is there something in the usermanual[1] that you don't understand?

Brgds Brian
[1] http://www.kannel.org/download/1.5.0/userguide-1.5.0/userguide.html

Hi, I am having problems to use sms-service with ...

2010-11-25T20:38:12.916+01:00

Hi,

I am having problems to use sms-service with get-url.
Can you provide a working sample?

Hi mwagiru Though you don't state any questio...

2009-08-25T19:22:45.100+01:00

Hi mwagiru

Though you don't state any questions I guess that you want to know why it doesn't work for you.
First I'm no kannel-guru, but it seems very clear that you have a problem with your configuration file as it dumps the error message:

ERROR: No 'smsbox' group in configuration, but smsbox-port set

which leads to a

PANIC: Cannot start with corrupted configuration

I'll suggest that you either try out the default configuration, the documentation or the usermail list.

Best regards
Brian

bernard@morpheus:/etc/kannel$ sudo /usr/sbin/beare...

2009-08-25T14:40:43.860+01:00

bernard@morpheus:/etc/kannel$ sudo /usr/sbin/bearerbox -v 1 kannel.conf
...
2009-08-25 16:35:48 [2313] [0] WARNING: DLR: using default 'internal' for storage type.
2009-08-25 16:35:48 [2313] [0] INFO: DLR using storage type: internal
2009-08-25 16:35:48 [2313] [0] INFO: Added logfile `/var/log/kannel/bearerbox.log' with level `0'.
2009-08-25 16:35:48 [2313] [0] ERROR: No 'smsbox' group in configuration, but smsbox-port set
2009-08-25 16:35:48 [2313] [0] PANIC: Cannot start with corrupted configuration
2009-08-25 16:35:48 [2313] [0] PANIC: /usr/sbin/bearerbox(gw_panic+0xd4) [0x80d4674]
2009-08-25 16:35:48 [2313] [0] PANIC: /usr/sbin/bearerbox(main+0xeac) [0x80558fc]
2009-08-25 16:35:48 [2313] [0] PANIC: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb79b5775]
2009-08-25 16:35:48 [2313] [0] PANIC: /usr/sbin/bearerbox [0x8053f31]
bernard@morpheus:/etc/kannel$ sudo vim /etc/kannel/kannel.conf

Hi standard I'm 100% sure I understand your quest...

2009-04-17T18:14:00.000+01:00

Hi standard

I'm 100% sure I understand your question, but I didn't update the modems.conf file, I just included it. I did consider finding the part that I needed but couldn't figure it out and didn't want to do it by trial and error, so I just decided that I was happy with a working configuration. I don't expect the file to be updated since if that was happening I think I should be able to do without it in the first place.

Brgds Brian

I am working on Kannel here. Do you need to modify...

2009-04-16T23:08:00.000+01:00

I am working on Kannel here. Do you need to modify the modem.conf ? or the conf file is automatically updated once you insert the usb modem?